东莞市长安鸿海五金机械设备加工厂

主营:紧固件,弹珠,金属材料,加工五金工具,安装自动化设备,各种铝合金材料
企业信息
  • 东莞市长安鸿海五金机械设备加工厂
  • 联系人:张红瑞
  • 联系电话:13925765012
  • 固定电话:0769-89239652
  • 客服: 点击这里给我发消息
  • 经营模式:生产型
  • 所在地区:广东 东莞
供应信息搜索
产品详情

东莞厂家供应调整螺栓,尼龙调整螺栓,橡胶家具脚

价    格:0.58元(不含税) / 套
数    量:50000个
规格:齐全
所属类型:螺栓
品牌:HH
点击询价
发布时间:2024/4/8 13:41:41
所在地:
  • 产品信息
  • 在线留言
  • 规格:齐全
  • 是否标准件:是
  • 材质:中碳钢
  • 标准类型:国标GB
  • 标准编号:
  • 品牌:HH
  • 表面处理:镀蓝白锌
  • 等级/硬度:4.8级
  • 螺纹类型:公制螺纹
  • 内径:
  • 外径:
  • 厚度:
  • 新旧程度:全新
  • 主要用途:
  • 产地/厂家:
  • 加工产品范围:
一、调节脚的定义。
又称可调脚、脚杯、也可叫调节螺栓、水平调节脚,是利用螺纹进行高度、左右调节的一种部件。用于设备高低、水平、倾斜的调整。
在许多机械设备安装工程中,调节脚是不可缺少的附件之一,它的作用是将设备与基础牢固地连接起来,以免设备在工作时发生位移和倾覆。
二、调节脚的分类。
1、性能分类:万向型、固定型
     万向型:螺杆和底座以"球头"方式组合成一体,球头具有万向转动功能。
      如您设备使用的地面有坑坑洼洼,此时,您可利用球头,转动螺杆的偏向弧度大小,让设备处于水平状态;  同时,可同步利用配套螺母调整设备的高低度,达到满意的效果为止,此系列的螺杆和底座,都处于活动状态,不能固定死。
 固定型:亦可分为“整体固定”和“局部固定”
      整体固定:螺杆和底座利用电焊或螺母锁紧,只有活动螺母可以拧动。
      局部固定:螺杆和底座利用卡簧或小螺钉连接,可以原地转动,但不能拉出 ,亦可以通过配套的活动螺母调节高度。
 2、承载分类:轻力型、中力型、重力型
轻力型:50KG-300KG;尺寸较小,材质偏以塑料底盘为主导。
中力型:300KG-1000KG;尺寸居中,不同承载力尺寸大小选择不一,底盘材质多以尼龙或碳钢为主导。
重力型:1000KG-5000KG;尺寸较大且材质以全碳钢或不锈钢为主导。
调节脚按用途名称又可分为以下几种:可调脚紧固件、尼龙关节蹄脚、固定脚蹄、可调脚、支撑脚、地脚螺钉、碳钢支撑脚、万向蹄脚、重力脚、避震脚、防滑垫脚、橡胶地脚、厨柜脚、家具脚、水箱调节脚、机械设备脚、机柜脚、橡胶垫脚、重力台脚等……。
三、调节脚的特点。
调节脚可调节承载物45度万向倾斜转动升降调节、上下水平调节承载物的高低。在现代生活生产中,调节脚扮演着不可缺少的角色。
四、调节脚材质规格。
调节脚螺杆一般选用碳钢圆棒,精加工而成,通过热处理,表面可以发黑(镀铬/锌/镍,等)也可选用合金钢或者不锈钢系列材料。
调节脚底座除用上面几种材质外,还可以用聚氨酯TPU,这种材比一般的塑料更具有:
机械强度高:TPU制品的承载能力、抗冲击性及减震性能突出。
耐寒性突出:TPU的玻璃态转变温度比较低,在零下35度仍保持良好的弹性、柔顺性。
高回弹性、吸震性、防滑、耐磨性、耐油、耐撕裂、耐化学腐蚀、耐辐射。
调节脚的规格:
调节脚底座可选40、50、60、80、100mm;
调节脚螺纹直径可选M6、8、10、12、14、16、18、20、24mm;
调节脚螺纹长度可选择30、50、80、100、120、150、200mm
除以上常用规格外,螺杆和底盘大小\外观,均可定制。
五、调节脚的应用。
    适用范围:各钢木家私、金属家私、健身器材、置物架、电视架、学生床、货架、电脑台桌、沙滩椅、美容器材、制造行业、各类机械仪器设备、流水线设备、各类家用电器设备、办公家具、厨房厨柜、超市货柜、展示柜等等、品种齐全、款式多样。
    One, adjusting pin definition.
Also known as the adjustable feet, foot cup, also called the adjusting bolt, horizontal adjusting foot, is highly regulated by screw thread, or a component. For the equipment level, level, a tilt adjustment.
In many mechanical equipment installation engineering, adjustable foot attachment is indispensable one, it is the role of the device and the base are fixedly connected, so as to avoid equipment at work shift and overturning.
Two, adjustable foot classification.
1, performance of classification: universal type, fixed type
Universal type: screw and the base to " ball " are combined into a whole, the ball head has a universal rotating function.
If you use the equipment ground holes, at this point, you can use a ball head, a rotating screw bias radian, let equipment at the state level; at the same time, can be synchronized using supporting nut adjustment equipment high and low, to achieve satisfactory results so far, this series of screw and the base, are in the active state, can not be fixed die.
Fixed: can be divided into " overall fixed " and " local fixed "
Monolithic stationary: screw and the base by welding or nut, nut can be screwed only activity.
Local fixed screw and the base: using circlip or small screw connection, you can rotate in place, but can not be pulled out, also can adjust the height of the movable nut supporting.
2, bearing classification: light type, type, type of gravity force
Light type: 50KG-300KG; small size, material of partial plastic chassis led.
Power type: 300KG-1000KG; size is different, the bearing capacity of a size selection, chassis with nylon or steel as the leading.
Gravity type: 1000KG-5000KG; large size and material to the carbon steel or stainless steel as the leading.
Adjustable foot press uses the name can be divided into the following categories: adjustable foot fastener, nylon joint foot, fixed foot shoe, adjustable legs, supporting feet, anchor bolts, steel support, universal foot, foot, gravity, skid shock absorbers feet stepping, rubber feet, kitchen cabinets, furniture legs, feet of water tank adjustable foot, foot, foot mechanical equipment cabinets, rubber foot, feet and other gravity platform ... ....
Three, adjustable foot characteristics.
Adjustable foot adjustable bearing 45 degrees rotation lifting regulation, universal tilt up and down regulation of the discretion of level carrier. In modern life, production, adjustable foot play an important role.
Four, adjustable foot material specifications.
Adjusting pin screw general selection of carbon steel round bar, finishing, by heat treatment, surface blackening ( chromium / zinc / nickel, etc.) can also use the alloy steel or stainless steel material series.
In addition to regulating foot base on several materials, also can use polyurethane TPU, this material has more than ordinary plastic:
High mechanical strength: TPU products carrying capacity, impact resistance and shock absorption performance highlights.
Hardy prominence: TPU glass transition temperature is relatively low, at minus 35 degrees and still keep the good elasticity, flexibility.
High elasticity, shock absorption, non-slip, wear resistance, oil resistance, tear resistance, chemical corrosion resistance, radiation resistance.
Adjustable foot specifications:
Adjustable foot base optional 40, 50, 60, 80, 100mm;
Adjusting pin thread diameter optional M6, 8, 10, 12, 14, 16, 18, 20, 24mm;
Adjustable foot length of thread can choose 30, 50, 80, 100, 120, 150, 200mm
In addition to the above common specifications, the screw and the chassis size and appearance, can be customized.
Five, adjustable foot application.
Application scope: steel wooden furniture, metal furniture, fitness equipment, racks, TV stand, student bed, shelves, computer tables, beach chair, beauty equipment, manufacturing industry, various types of machinery and equipment, assembly line equipment, all kinds of household electrical appliances, office furniture, kitchen cabinets, supermarket container, display cabinets, etc. variety complete, diverse styles.
 
 
   
 
*标题:
*内容:
*姓名:
*手机:
*验证: 

内容申明:中华标准件网为互联网信息服务提供者,中华标准件网 (含网站、客户端等)所展示的商品的标题、价格、 详情等信息内容系由商家发布,其真实性、准确性和合法性均由商家负责。中华标准件网 提醒您购买商品前注意谨慎核实,如您对商品的标题、价格、详情等任何信息有任何疑问的 ,请在购买前与商家沟通确认;如您发现商铺内有任何违法/侵权信息,请立即向中华标准件网举报并提供有效线索。